C Series Piston Section 1 - Cylinder Block - Group 01 Page 1-101 Valve leakage is often audible from the intake and exhaust manifold. Cylinder Head Gasket Sealing If the compression is low on adjacent cylinders and the pressure can not be increased by oiling the rings, the cylinder head gasket is probably leaking between the cylinders. Refer to Procedure 002-021 in Section 2. Low compression on a single cylinder can be caused by an external leak or a leak to a coolant passage. A leak to a coolant passage of this magnitude will also result in coolant in the cylinder. A compression leak to the coolant will normally be detected by loss of coolant as the coolant is blown from the cooling system.
Service Tip: Remove the drive belt from the water pump. Run the engine for 1 to 2 minutes and check for coolant being blown from the radiator by compression gases.