Cummins — 3666003

C Series Piston Section 1 - Cylinder Block - Group 01 Page 1-103 Clean and Inspect for Reuse When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING WARNING Some solvents are flammable and toxic. Read the manufacturer's instructions before using. CAUTION Make sure the cleaning solvent is approved for aluminum. Damage to the pistons can result. Allow the pistons to soak for a minimum of 30 minutes in a tank containing an approved cleaning solvent for aluminum. Use a hot, soapy solution and nonmetallic brush to remove carbon deposits.

CAUTION Do not use a metal brush. A metal brush will damage the piston ring grooves. Do not use glass beads, walnut shells, or plastic bead blasting to clean the piston ring grooves or pin bores. This can cause the pin bore to crack or the rings not to seat. When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury. WARNING WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause bodily injury. Use steam to clean the pistons. Dry with compressed air.