Cummins — 3666003

C Series Piston and Connecting Rod Assembly Section 1 - Cylinder Block - Group 01 Page 1-129 Carefully push the piston into the bore while guiding the connecting rod to the crankshaft journal. Lubricate the threads and underside of the connecting rod capscrew heads with clean engine oil. The number stamped on the rod and cap at the parting line must match and be installed on the oil cooler side of the engine. CAUTION Install the connecting rod cap and capscrews to the connecting rod. Alternately, tighten the two connecting rod capscrews. Torque Value: Step 1 30 N•m [ 22 ft-lb ] Step 2 70 N•m [ 52 ft-lb ] Step 3 90 degree turn