C Series Cylinder Head Section 2 - Cylinder Head - Group 02 Page 2-7 Cracks between the valve seats are not acceptable and the cylinder head must be replaced. Inspect the valves for indications of leakage or burning. Use a straightedge and feeler gauge to check the cylinder head combustion surface for flatness. Cylinder Head Flatness Specifications mm in End-to-End 0.20 MAX 0.008 Side-to-Side 0.076 MAX 0.003 Use a small 51 mm [2 in] straightedge and a 0.0254-mm [0.001-in] feeler gauge to measure local flatness. Check between the cylinder bores and between the coolant passages.
If the 0.001-inch feeler gauge fits under the 2- inch straightedge, the cylinder head must be replaced or resurfaced.