Valve, Cylinder Head C Series Page 2-22 Section 2 - Cylinder Head - Group 02 Check the valve stem tip for flatness. Inspect for bent valves. Measure the rim thickness to determine if there is enough stock to grind the valve. Valve Rim Thickness Limit mm in 2.21 MIN 0.087 NOTE: If the valves are determined to be suitable for resurfacing, refer to the Shop Manual, C Series Engines, Bulletin 3666008. Inspect the valve springs. Measure the valve spring. Approx. Free Length (L): 1996 65.66 mm [ 2.585 in ]