Cummins — 3666003

C Series Fuel Injection Pumps, In-Line Section 5 - Fuel System - Group 05 Page 5-15 Use fuel pump gear puller, Part Number 3163381 or Part Number 3824469 with M8-1.25 x 50 capscrews, grade 8.8 or equivalent. Pull the fuel injection pump drive gear loose from the shaft. Slowly rotate the crankshaft counterclockwise about 40 degrees past the desired static timing specification. Slowly rotate the crankshaft clockwise until the timing pointer indicates the desired static timing. To prevent damage to the timing pins, do not exceed the torque value given. This is not the final torque value for the retaining nut. CAUTION Install and tighten the retaining nut and washer.

Torque Value 12 N•m [ 106 in-lb ]