Fuel Injection Pumps, In-Line C Series Page 5-18 Section 5 - Fuel System - Group 05 Remove the front gear cover access cap. Remove the nut and washer from the fuel injection pump shaft. Use fuel pump gear puller, Part Number 3163381 or Part Number 3824469 with M8-1.25 x 50 capscrews, grade 8.8 or equivalent. Pull the fuel injection pump drive gear loose from the shaft. Engines equipped with the P7100, P3000, A, and MW fuel injection pump are equipped with support brackets that must be removed. Remove the four fuel injection pump mounting nuts. Remove the fuel injection pump.