Cooling System C Series Page 8-26 Section 8 - Cooling System - Group 08 Flush Marine Applications RESTORE™ is a heavy-duty cooling system cleaner that removes corrosion products, silica gel, and other deposits. The performance of RESTORE™ is dependent on time, temperature, and concentration levels. An extremely scaled or flow-restricted system, for example, can require higher concentrations of cleaners, higher temperatures, or longer cleaning times or the use of RESTORE Plus™. Up to twice the recommended concentration levels of RESTORE™ can be used safely. RESTORE Plus™ must be used only at its recommended concentration level.
Extremely scaled or fouled systems can require more than one cleaning. Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. WARNING If not previously done, drain the cooling system. See the information above in "Cooling System - Drain” step. Do not allow the cooling system to dry out. Do not remove the coolant filter. CAUTION Fleetguard® RESTORE™ contains no antifreeze. Do not allow the cooling system to freeze during the cleaning operations. Immediately add 3.8 liters [1 gal] of Fleetguard® RESTORE™, RESTORE Plus™, or equivalent, for each 38 to 57 liters [10 to 15 gal] of cooling system capacity.
Fill the system with clean water. Operate the engine at normal operating temperatures, at least 85°C [185°F], for 1 to 1Ѕ hours. Shut the engine OFF, allow to cool to 50°C [122°F], and drain the cooling system.