Cummins — 3666003

Cooling System - Air or Combustion Gas Test C Series Page 8-34 Section 8 - Cooling System - Group 08 If the color of the test fluid changes from blue to yellow or green anytime during the test, combustion gases are leaking into the cooling system. Discontinue the test if the color of test fluid changes from blue to yellow. If the color of the test fluid does not change from blue to yellow or green during the 30-minute test period, return the engine to low idle. Check the test instrument to make sure it is firmly sealed in the radiator fill neck. Insert the tip of the rubber ball into the hole in the top of the test instrument.

Squeeze the rubber ball 2 to 3 minutes to draw air from the radiator through the test fluid. If the color of the test fluid remains blue, combustion gases are not entering the cooling system. If the color of the test fluid changes from blue to yellow or green, combustion gases are entering the cooling system and further investigation is required to determine the source of the combustion leak.