Cummins — 3666003

C Series Cooling System - Air or Combustion Gas Test Section 8 - Cooling System - Group 08 Page 8-35 NOTE: As the cooling system warms up to operating temperature, air will be expelled through the combustion gas tester in the form of bubbles in the test fluid. This is due to normal expansion of the coolant. Do not mistake the presence of air bubbles in the tester for combustion gases or air leaking into the cooling system. A change in the color of the test fluid from blue to yellow or green is the only indication of combustion gas in the cooling system. A positive result from the combustion leak tester indicates one or more of the following:

Cracked cylinder head Cylinder head or gasket leakage Air compressor head or gasket leak. NOTE: Discard the test fluid if it has indicated positive. A negative result from the combustion leak tester, coupled with a continuous flow of air bubbles from the previous test, indicates the following: Air entrained because of a faulty thermostat jiggle pin, incorrect fill, or faulty coolant system plumbing. Air in the coolant can result in loss from the overflow when the aerated coolant is hot. The heated air expands, increasing the pressure in the system and causing the cap to open.

Similarly, coolant can be displaced through the overflow if the head gasket leaks compression gases into the cooling system.