C Series Fan Hub, Belt Driven Section 8 - Cooling System - Group 08 Page 8-37 Install Install the spacer, fan, and four mounting capscrews. Tighten the mounting capscrews. Torque Value: 43 N•m [ 32 ft-lb ] Install the drive belt; refer to Procedure 008-002. Fan Hub, Belt Driven (008-036) Preparatory Steps Remove the drive belt. Refer to Procedure 008-002 (Drive Belt, Cooling Fan) in Section 8. Remove the fan pulley. Refer to Procedure 008-030 (Fan Drive Idler Pulley Assembly) in Section 8. Remove Remove the four fan hub mounting capscrews. Remove the fan hub.