Cummins — 3666003

Fan Hub, Belt Driven C Series Page 8-38 Section 8 - Cooling System - Group 08 Clean and Inspect for Reuse When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury. WARNING WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury. Steam clean the exterior of the fan hub. Dry with compressed air. Inspect the fan hub for indications of oil seal leakage. Inspect the fan hub for cracks or other damage. Inspect the fan hub chamfer and fan pulley mating surface for damage. Replace the fan hub if damage is found.

The fan hub must spin freely without any wobble or excessive end clearance. Turn the fan hub by hand to check for freedom of rotation. Inspect the fan hub bearing for wear. The bearing must have a minimal amount of side-to-side or end-play movement. Replace the fan hub if there is more than 0.15 mm [0.006 in] of end play in the fan hub. Fan Hub End Play mm in 0.15 MAX 0.006 NOTE: Some fan hub assemblies can be rebuilt with new bearings and related components. Check for part availability before disassembling the fan hub.