Cummins — 3666003

C Series Water Pump Section 8 - Cooling System - Group 08 Page 8-51 Remove the drive belt. Refer to Procedure 008-002. Remove Remove the alternator link; refer to Procedure 013-001. Remove the water pump mounting capscrews, and water pump. Inspect for Reuse Inspect the coolant hose. The coolant flow can also be reduced if the inlet hose to the water pump collapses. A hose will usually not collapse while the engine is running at low speed. Inspect the hose while the engine is running at rated speed. Make sure that the engine is warm, so the thermostat is open. Engine Temperature 88 °C [ 190 °F ]