Cummins — 3666003

C Series Aftercooler Assembly Section 10 - Air Intake System - Group 10 Page 10-3 Preparatory Steps Automotive and Industrial WARNING Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury. Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. WARNING Disconnect the cold starting aid, if used. Refer to the OEM service manual. Remove the air crossover tube. Refer to Procedure 010-019. Drain 2 liters [2 qt] of coolant. Refer to Procedure 008-018.

Remove Remove the coolant supply tube (1) and the coolant return tube (2) from the aftercooler. Remove the aftercooler housing mounting capscrews. Remove the aftercooler housing and gasket. NOTE: For a form-in-place gasket, cut the aftercooler gasket to remove.