Cummins — 3666003

Air Leaks, Air Intake and Exhaust Systems C Series Page 10-8 Section 10 - Air Intake System - Group 10 Excessive smoke and low power from a turbocharged engine can be caused by pressurized air leaking from loose connections, or cracks in the crossover tube or intake manifold. This can cause a noise problem. In addition to the inspection for cracks and loose fittings, liquid soap can be applied to the charge-air cooler connections and the manifold cover sealing surfaces to find the leaks. The leaks will create bubbles that are easier to detect. Measurement of manifold pressure is described in this section.

Initial Check Engine intake air must be filtered to prevent dirt and debris from entering the engine. If intake air piping is damaged or loose, unfiltered air will enter the engine and cause premature wear. CAUTION Inspect the intake air piping for cracked hoses, damage, or loose clamps. Replace damaged pipes and tighten loose clamps as necessary to make sure the air intake system does not leak. Torque Value: 8 N•m [ 71 in-lb ]