Cummins — 3666003

C Series Air Leaks, Air Intake and Exhaust Systems Section 10 - Air Intake System - Group 10 Page 10-9 Check for corrosion of the intake system piping under all clamps and hoses. Corrosion can allow corrosive products and dirt to enter the intake system. Disassemble and clean as required. Operate the engine at high idle and use a solution of soapy water to spot intake air leaks. NOTE: If an air leak exists, the soap bubbles will be drawn in with the air. Operate the engine at full throttle and rated rpm under maximum load conditions. Listen for a high-pitched whistling noise from the turbocharger, nearby piping, and connections. The noise can be caused by an air leak from the: 1.

Turbocharger-to-discharge-elbow connection Inspect for damage. Tighten loose clamps. Torque Value: 8 N•m [ 71 in-lb ] 2. Any charge-air cooler tubing or connecting hoses Inspect the hose and tubing for damage. Tighten the hose clamps. Refer to the manufacturer's specifications for the correct torque value.