Cummins — 3666003

Engine Run-in (Engine Dynamometer) C Series Page 14-16 Section 14 - Engine Testing - Group 14 Do not shut off the engine immediately after it has been loaded. It must be allowed to sufficiently cool. CAUTION Remove the dynamometer load completely, and operate the engine at idle speed for 3 to 5 minutes. This will allow the turbocharger and other components to cool. Idle periods longer than 5 minutes are to be avoided. Shut off the engine after the cool down period. Remove all test instrumentation. Remove the engine from the dynamometer. If the engine is to be stored temporarily and does not have permanent type antifreeze, it is necessary to drain all coolant.