Marine Vibration Isolator C Series Page 16-44 Section 16 - Mounting Adaptations - Group 16 If the isolator is out of alignment, the mounting will need to be adjusted. Wedges can be used to shim the base to achieve proper alignment. Shims must be made of a solid material that will not compress under the weight of the engine. Preparatory Steps WARNING Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. Disconnect the battery.
Refer to the original equipment manufacturer (OEM) service manual. Disconnect the propeller shaft. Disengage the flange. Refer to Procedure 016-025 in Section 16.