I003307 Fig. 203. I003308 Fig. 204. I003311 Fig. 205. I003339 Fig. 206. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Switch to the status indicator with the measuring gauges The accuracy of the GPS positioning can be viewed on the "GPS Details" page. The Accuracy value shows an estimate of the difference between the position determined by the GPS satellites and the actual position of the tractor (static accuracy). The longer the Auto-Guide system is operating, the more accurate it becomes.
To calibrate the DMU "gyro compass" an accuracy of at least 0.5 m must be available. N OTE : See also: Chapter 0000 Reg. E Reading out Auto-Guide system in- formation "Details". Perform calibrating roll bias without mounted implement Conditions for roll bias calibration Press DETAILS in the "Status" screen 0000 - Overall system/tractor F - Setting and calibrating Scroll with the arrow key 302 T001196 Version 1 07-11-2007 F - Setting and calibrating