Fig. 5. I005045 Fig. 6. The B085 - Camshaft speed sensor is necessary for the synchronisation of the injection events. It reports the speed and the position of the camshaft at cylinder 1 ignition. This reference mark must then match the B088 - Crankshaft speed sensor. When the camshaft is rotating, an alternating voltage (VAC) is induced in the B085 - Camshaft speed sensor by the marks on the camshaft gear. The A051 - ECU, engine control unit (EDC 7). calculates the camshaft speed from the voltage frequency. The double cog (reference mark) causes a change in the frequency.
The double cog (reference mark) is used to determine the current position of the camshaft and appears once per working cycle, at TDC cylinder 1 ignition. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 3 Shielding against interfer- ence Sensing the current engine position (cylinder 1 igni- tion) Sensing the engine speed (camshaft speed) for emer- gency running characteristics Self diagnosis Pin Function 1 Signal 2 Earth Functions of the B085 - Camshaft speed sensor 6 B085 camshaft speed N OTE :
Working cycle (4-stroke engine) 2 crankshaft revolutions 1 camshaft revolution 2000 - Overall system/engine A - General 18 T002543 Version 2 05-10-2009 A - General Pin Function 1 Signal 2 Earth 3 Shielding against interfer- ence