I002243 Fig. 11. N OTE : Emergency mode: If the engine control unit detects a fault, it will activate emergency mode. Because the dispensing unit is no longer ener- gised, the high-pressure pumps deliver their full stroke and the rail pressure rises. The high-pressure limiting valve DBV opens at a pressure of approx. 1800 bar. The engine can run in emergency mode for a maximum of 4 minutes. Because use of the DBV rapidly heats the fuel, the engine is switched off automatically by the engine. 4 10 Piston with control slits Piston (10) is actuated by magnetism and opens a flow cross-section depending on its position.
The Y091 solenoid valve is activated by a PWM signal (proportional solenoid) Application of 0 VDC --> full flow from the pump 6 12 Locking element Item Item Designation 1 7 Residual air disc 2 8 Solenoid core 3 9 O-ring 5 11 Spring 2060 - Engine/fuel system A - General 18 T002074 Version 1 20-10-2009 Check Chassis Range! Item Designation Item Designation 1 X1662 separation point 7 Residual air disc 2 Housing 8 Solenoid core 3 Bearing 9 O-ring 4 Anchor with plunger 10 Piston with control slits 5 Winding with coil bobbin 11 Spring 6 Housing 12 Locking element