Fendt 900 Vario COM III — 14 Fault code 0D.1.00 -

922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..

1001- 0000 - Overall system/tractor B - Faults Version 1 05-10-2009 0D.1.23 A055 - ECU, data transfer EEPROM communication report- ing fault upon data transmission System operation not possible, potentially Replace hardware, restart tractor Fault code DIN brief description Cause Consequences Reference FENDIAS/Note 94 Fault code DIN brief description Cause Consequences Reference FENDIAS/Note 0D.1.23 A055 - ECU, data transfer EEPROM communication report- ing fault upon data transmission System operation not possible, potentially Replace hardware, restart tractor 0D.1.24 A055 - ECU, data transfer EEPROM communication check- sum error System operation not possible, potentially Replace hardware, restart tractor 0D.1.25 A055 - ECU, data transfer Watchdog error when communi- cating with EEPROM System operation not possible, potentially Replace hardware, restart tractor 0D.1.26 A055 - ECU, data transfer Bluetooth module error (parity) Replace hardware, restart tractor 0D.1.27 A055 - ECU, data transfer Bluetooth module error (framing) Replace hardware, restart tractor 0D.1.28 A055 - ECU, data transfer Bluetooth module error (overflow) Replace hardware, restart tractor 0D.1.2B A055 - ECU, data transfer Communication error to clock No time, replace hard- ware, restart tractor 0D.1.2C A055 - ECU, data transfer Time module (RTC) losing data/hardware faulty Time module (RTC) los- ing data, replace hard- ware 0D.1.2D A055 - ECU, data transfer Internal time module (RTC) bat- tery faulty/hardware faulty Time module (RTC) los- ing data, replace hard- ware 0D.1.2E A055 - ECU, data transfer Hardware faulty No time, replace hard- ware if necessary 0D.1.2F A055 - ECU, data transfer Data from time module (RTC) checked for plausibility at system start-up Incorrect time, set time 0D.1.30 G001 - Battery 1 Supply voltage not in 8 V to 18 V range (for longer than 10 seconds) Check power supply; possible system failure