Miscellaneous—Operational Checkout 10 Bucket Dump Drift Check NOTE: This check may require two people. NOTE: Machine must be equipped with a bucket for this check. Close cab door—if equipped. Operate hydraulic system until hydraulic oil reaches temperature specification. Specification Hydraulic Oil—Temperature..................................................................................... 43°C 110°F Raise boom halfway. Fully roll back bucket. Dump bucket halfway. Engage park brake. Mark and record a distance on the bucket cylinder rod from the cylinder barrel. Disengage park brake. Allow machine to sit with engine speed at slow idle for 5 minutes. Engage park brake.
Specification Bucket Circuit—Drift (maximum)............................................................. 12.7 mm/5 min. 0.5 in./5 min. Measure marked distance on bucket cylinder rod. NO: Go to next step in this check. LOOK: Does bucket drift down more than specification? YES: Go to next check. Raise boom halfway. Fully roll back bucket. Dump bucket halfway. Engage park brake. Turn engine off. Allow machine to sit for 5 minutes. YES: See your authorized dealer. Specification Bucket Cylinder—Drift (maximum).......................................................... 12.7 mm/5 min. 0.5 in./5 min. LOOK: Does bucket drift down more than specification? NO: Go to next check.
Continued on next page OUT4001,000051E -19-04DEC09-21/28 4-2-7 071713 PN=152