John Deere 326D, 328D, 332D — Anti-Theft Security System Operation—If Equipped

Operation—Operator’s Station Anti-Theft Security System Operation—If Equipped IMPORTANT: When providing operator security codes to machine users, owners should not provide operators with the default codes. Instead, owners should first change the default operator security codes to other values before providing codes to machine users. 2. The monitor display shows “Press Select to Lock ATS.” NOTE: If you do not press SELECT to lock the machine within 20 seconds of turning key switch OFF, the EMU will NOT lock the machine. 3. Press the SELECT button within 20 seconds to lock the machine. NOTE: On a locked machine, engine can be started but will shut down after 3 seconds.

Unlocking the Machine (Operator and Owner) Auto Lock—5 Minutes 1. Sit in the operator's seat to power up the engagement and monitor unit (EMU). 1. Turn key switch to OFF. 2. The monitor display shows Min Auto Lock Lock Now?” 2. Turn key switch to ON position. 3. The EMU displays “Enter Code 0 _ _ ” (3-digit system) or “Enter Code 0 _ _ _ _ ” (5-digit system). 3. Machine remains unlocked for the next 5 minutes. After 5 minutes, a valid 3-digit or 5-digit security code, depending on system configuration is required for machine operation. 4. Enter the appropriate security code: OR a. Press the NEXT button or the BACK button to change the number displayed in the active (flashing) field.

The NEXT button increments the current digit; the BACK button decrements the current digit. Press SELECT to lock the machine immediately. Auto Lock—60 Minutes b. Press the SELECT button to accept the number displayed (flashing) in the active field and shift the active field to the next digit to the right. 1. Turn key switch to OFF. 2. The monitor display shows Min Auto Lock Lock Now?” NOTE: Pressing the SELECT button to accept the last digit (third digit or fifth digit depending on system configuration) processes the entered security code. 3. Machine remains unlocked for the next 60 minutes.

After 60 minutes, a valid 3-digit or 5-digit security code, depending on system configuration is required for machine operation. 5. If a correct security code is entered, the monitor displays “AntiTheft Unlocked” for 2 seconds before the EMU returns to the normal run-time display. OR Press SELECT to lock the machine immediately. If the security code was incorrect, the display shows “Invalid Code”. IMPORTANT: The default Owner security code for the anti-theft security system is 111 for 3-digit security systems and 00111 for 5-digit security systems. The default Operator security codes are 000, 999, and 998 for 3-digit security systems, and 00000, 00999, and 00998 for 5-digit security systems.

NOTE: The anti-theft security system allows three attempts to enter a valid security code before requiring the key switch to be turned OFF and ON to restart the process. Locking the Machine (Operator and Owner) When providing Operator security codes to machine users, owners should not provide operators with the default codes. Instead, owners should first change the default Operator security codes to other values before providing codes to machine users. There are three different locking methods available with the anti-theft security system: Prompt for Lock Auto Lock—5 Minutes Auto Lock—60 Minutes NOTE: On a locked machine, engine can be started but will shut down after 3 seconds.

Once the anti-theft security system has been enabled, either as a factory installed option or field installation, the system needs to be configured. Select the locking method and change the Owner and Operator security codes as necessary. Prompt for Lock 1. Turn key switch to OFF. Continued on next page OUT4001,0000504 -19-25MAR10-1/3 2-1-8 071713 PN=39