John Deere 326D, 328D, 332D — Creep Mode Operation—If Equipped

Operation—Operating the Machine Self Leveling Hydraulics—If Equipped If machine is equipped with self leveling option, the attachment will remain in same relative position as the boom is raised. NOTE: Self leveling is only operational during boom raise function. TX1067211A —UN—03NOV09 Press upper half of self leveling switch (1) to activate this feature. Press lower half of self leveling switch to deactivate. 1— Self Leveling Switch OUT4001,0000534 -19-06NOV09-1/1 High Flow Hydraulics—If Equipped IMPORTANT: Avoid attachment damage. Only use high flow switch (1) with high flow attachments.

If machine is equipped with high flow hydraulics and attachment requires a high hydraulic flow rate to operate, connect attachment to high flow male and female couplers. (See Operating Auxiliary Hydraulics in this section.) TX1067231A —UN—03NOV09 Push upper half of high flow switch (1) momentarily to turn ON and activate high flow option. Amber hydraulic high flow icon will appear on EMU. Push upper half of switch again to turn high flow option OFF. 1— High Flow Switch OUT4001,0000535 -19-03NOV09-1/1 2-2-25 071713 PN=77