Komatsu — REPLACE FUEL MAIN FILTER CARTRIDGE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE after carrying out the maintenance in the "REPLACE PRE-FUEL FILTER CARTRIDGE WARNING 4 - 60 Carry o ut this operatio (PAGE 4-53)" for ever After t he engine has b een operated, all parts are a t high temperature, so do not replace the filter im mediately. Wait for all parts to coo l down before st arting the operation. l piping system when the engine is running. High p ressure is gene rated inside the engine fue When replacing the fil ter, wait for at least 30 sec onds after stopping the engine to let the interna l pressure go down before replac ing the filter. r flame close. ng the air bleed plug in the fuel filter head.

It is still under pressure, so fuel may spurt out. Do not bring any fire o Be car eful when openi ng the air bleed plug in th e fuel filter head. It is still under pressure, so fuel NOTICE Genui ne Komatsu fue l filter cartridges use a sp ecial filter that has highly efficient filtering ability . When replacing the filter cartrid ge, always use a genuine Komatsu part. The co mmon rail fuel injection system used on t his machine consists of more precise parts than the conventional injection pump and nozzle. If any part other than a genuine Komatsu filter ca rtridge is used, dust or dirt may get in and cause problems with the injection system . Always avoid using substitute parts.

When carrying out ins pection or maintenance of the fuel system, pay more attention than normal t o the entry of dirt. If dirt is stuck to any part, use fuel to wash it off complet ely. Prepare a filter wrench and a container to cat 1. Set the container under the filter cartridge 2. Clos e the fuel valv 3. Usin g a filter wren ch, turn filter cartridge ( to re move it.