. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE and take out the REMARK CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING 4 - 64 7. Remo strain 8. Wash the strainer in clean diesel oil or flu 9. Install the strainer 0. Add th e refill amou nt of engine oil through oil filler port (F), then When installing ca p to the tank, push it do the cap is not install ed correctly, it will caus When inst alling the ca p, press the cap down, and turn it until it is securely in contact with the 1. After a dding oil, ch eck that the oil is at the specified level. For details, see "CHECK OIL LEV EL IN HYDRAULIC TANK , ADD OIL ( PAGE 3-83)".
The oil i s at high temp erature immediately after t he machine has been operated. Wait for the oil to coo l down before carrying out main tenance. The und ercover is hea vy, so do not go directly u nder the cover when opening or closing it. When rem oving bolts (2) and (3), carry ou t the operatio n at the rear of the point im mediately under the cover so that it is possible to esc ape at any time. Refill c apacity: 1.5 l iters (0.40 US gal) 1. Open the engine si de cover on the left of th e machine; you ca see di pstick (G).