Komatsu — Cooling Fan Auto-Reverse Rotation Switch

Conditions for Switching Fan Rotation OPERATION You can switch from normal rotation to reverse rotation manually or automatically. Using Manual Reverse Rotation Function You can switch from normal rotation to reverse rotation and from reverse rotation to normal rotation. Switching from Normal Rotation to Reverse Rotation The fan will switch from normal rotation to reverse rotation only if all the following conditions are fulfilled. If all the conditions are not fulfilled, the fan direction will not change. Conditions: Portion (b) of the cooling fan automatic reverse rotation switch is pressed once. The engine speed is between Lo and 1,200 rpm.

The engine water temperature is less than 90°C (194°F). (The indicator on the engine water temperature gauge is below horizontal.) The hydraulic oil temperature is less than 90°C (194°F). (The indicator on the hydraulic oil temperature gauge is below horizontal.) The torque converter oil temperature is below 100°C (212°F). (The indicator on the torque converter oil temperature gauge is below horizontal.) At least 30 seconds have passed since the engine was started. If the direction is switched, the cooling fan reverse rotation pilot lamp on the machine monitor will change from flashing and will remain illuminated.

If the direction is not switched, the cooling fan reverse rotation pilot lamp on the machine monitor will continue to flash. Switching from Reverse Rotation to Normal Rotation The fan will switch from reverse rotation to normal rotation if any of the following conditions are fulfilled. If none of the conditions are fulfilled, the fan direction will not change. Conditions: More than ten minutes have passed after the fan started to rotate in reverse and the engine speed has dropped to less than 1,200 rpm. When portion (b) of the cooling fan automatic reverse rotation switch is pressed again when the fan is rotating in reverse, and the engine speed has dropped to less than 1,200 rpm.

If the direction is switched, the cooling fan reverse rotation pilot lamp on the machine monitor will change in this manner: Lighted up flashing OFF. If the direction is not switched, the cooling fan reverse rotation pilot lamp on the machine monitor will change from being illuminated to flashing and will continue to flash. WA430-6 2-55