(E) Setting seat for weight OPERATION Sit on the seat; raise your body slightly; then operate switch (5) to adjust the strength of the suspension. Adjustment range: . . . . . . . . . . . 50 - 130 kg (110 - 287 lb) (target) When + is pressed: Suspension becomes stronger. When - is pressed: Suspension becomes weaker. (F) Adjusting reclining angle Move lever (6) up and move the backrest to the front or rear. Push your back against the backrest when carrying out this adjustment. If your back is not pressing against the backrest, the backrest may suddenly spring forward. Adjustment range: Front tilt: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Free Rear tilt: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° (2° x 20 stages) (G) Adjusting headrest angle (if equipped) Rotate the headrest to the front or rear. Adjustment range: Front tilt: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13° Rear tilt: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13° (H) Adjusting headrest height (if equipped) Move the headrest up or down. Adjustment range: . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mm (3.2 in) Remark If the seat back is reclined too far, the headrest may hit the rear glass.
Move it to a position where it does not contact the glass. (I) Adjusting armrest angle Rotate knob (7) and adjust the angle of the armrest (left side only). Adjustment range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73° Front: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54° Rear: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19° If the arm rest is turned, it will spring up (both left and right sides). (J) Lumbar support Operate switch (8) to provide suitable tension to the lower lumbar region. Operate switch (9) to provide suitable tension to the upper lumbar region.
When + is pressed: Tension becomes stronger. When - is pressed: Tension becomes weaker. (K) Side support Operate switch (10) to provide suitable tension to the left and right lumbar region. When + is pressed: Tension becomes stronger. When - is pressed: Tension becomes weaker. WA430-6 2-91