OPERATION Removing or Installing Headrest Follow these instructions if it is necessary to remove or install the headrest. Removal 1. Pull up the headrest to the position where it stops. 2. From the top of the seat back, turn stopper (1) (under the material at the top of the seat) of the headrest bar on one side in the direction of the arrow and pull up the headrest. When stopper (1) is turned, it comes out of groove (2). 3. Turn stopper (1) on the other side in the direction of the arrow and pull up the headrest. When both stoppers (1) come out of groove (2), the headrest can be removed. Installation 1. Insert the bars into the holes in the top of the seat. 2. Push down on the headrest.
2-92 WA430-6