Adjusting Seat Belt OPERATION Before fastening the seat belt, check that there is no abnormality in the seat belt or the seat belt mounting bracket. If the belt is worn or damaged, replace it. See “Seat Belt Inspection” on page 1-11. Fasten the seat belt before starting operations. Always wear the seat belt during operations. Make sure that the seat belt is not twisted when fastening it. Fastening Seat Belt Fasten the belt so that it is tight without being too tight. 1. Sit on the seat; depress the brake pedal fully; and adjust the seat so that your back is pressed against the backrest. 2. After adjusting the seat position, adjust tether belt (1).
Tense the tether belt and install it when there is no one sitting on the seat. 3. Sit on the seat; hold buckle (2) and tongue (3) with your left and right hands; insert tongue (3) into buckle (2); then pull the belt to check that it is securely locked. Fasten the belt along your body without kinking it. Adjust the lengths of the belt on both the buckle and the tongue sides so that the buckle is located at the front, mid- point of your body. Removing Seat Belt When removing the belt, press the red button in buckle (2) to free the belt. Adjusting Belt Length To make the seat belt shorter: Pull the free end of the tether belt. To make the seat belt longer:
Position the fixed end of the tether belt at 90° to the holder, and pull. WA430-6 2-93