OPERATION Adjusting Lever Stand When adjusting the lever stand, check that the work equipment lock lever is securely at the LOCK position. If the work equipment lock lever is not at the LOCK position and the work equipment control levers are touched by accident when adjusting the lever stand, the work equipment may suddenly move and cause serious personal injury. Adjusting Height and Angle of Wrist Rest The height and angle of armrest (1) can be adjusted by loosening lock lever (2). Height adjustment amount: . . . . . . . . . . . . . . . . . . 30 mm (1.18 in) Angle adjustment amount: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44° 1. Set lock lever (2) to the FREE position (F).
The lock lever is loosened. 2. Hold the armrest at the desired position and move the lock lever to the LOCK position (L) to secure the armrest in position. Adjusting Lever Stand Forward and Backward 1. Pull lever (3) up with your left hand. 2. Grip armrest (1) with your right hand and move it to the front or rear. 3. Release lever (3). Amount of adjustment: . . . . . . . . . . . . . . . . . . . . . 180 mm (7.09 in) 2-94 WA430-6