Komatsu — Final Checks Before Starting Engine

OPERATION Final Checks Before Starting Engine Before starting the engine, check that the work equipment lock lever is securely at the LOCK position. If the work equipment control lever is touched by mistake when the engine starts, the work equipment or machine may move unexpectedly, leading to serious personal injury. 1. Check that parking brake switch (1) is at the ON position (A). 2. Check that directional lever (2) is at the neutral position (N). Remark If the directional lever is not at the N position, the engine will not start. 3. Check that the bucket is completely lowered to the ground. If not, do these steps to lower the bucket. A.

Set the work equipment control lever to the HOLD position, then set the work equipment lock lever to the FREE position. B. Operate the work equipment control lever to lower the bucket to the ground. C. Check that the work equipment control lever is at the HOLD position, then set the work equipment lock lever to the LOCK position. 2-96 WA430-6