Komatsu — Final Checks Before Starting Engine

4. Check that work equipment lock lever (3) is at the LOCK position (L). OPERATION 5. Insert the key in starting switch (4); turn the key to the ON position (B); and check that the machine monitor system works. When the starting switch is turned to the ON position before starting the engine, the monitors, gauges, and central warning lamp light up for approximately two seconds; the alarm buzzer sounds for approximately two seconds. If any monitor does not light up, there is probably a failure or disconnection. Contact your Komatsu distributor for inspection.

In addition, after all the monitors, gauges, and central warning lamp light up, a self-check is carried out to check that the emergency steering function works properly. For details about the self-check function, see “Emergency Steering Self-Check Function” on page 2-117. If any monitor does not illuminate, there is probably a failure or disconnection. Contact your Komatsu distributor for inspection. WA430-6 2-97