OPERATION If leveling operations are carried out with the machine traveling forward, do not make angle (a) between the cutting edge of the bucket and the ground surface facing down more than 8°. If leveling operations are carried out when driving forward with angle (a) between the cutting edge of the bucket and the ground surface facing down more than 8°, the bucket cylinder will be pushed by the pushing force of the machine. This will cause the cylinder to retract and the bucket will face down at a greater angle. There is danger of the work equipment breaking. Loading Bucket Do not load the bucket or scoop up the load with the load on the corner of the bucket or on one side of the bucket.
This will cause the machine to twist and will reduce the service life of the work equipment and the frame. When carrying out digging or scooping-up operations, thrust the center of the bucket into the load. 2-134 WA430-6