OPERATION If you are using the optional multi-function lever, set the work equipment lock switch to the LOCK position (a). 8. Turn the key in the starting switch to the OFF position (A) and remove the key. 9. Read the inclinometer and record the coupler dump angle. The coupler angle is 90° when the bucket is parallel to the surface. So the 90° on the inclinometer is actually 0°; measure the dump angle from 90° to the needle. Example: if the needle reads 47°, then the coupler dump angle is 90° - 47° = 43°. 2-148 WA430-6