OPERATION LIFTING THE MACHINE The person using the crane to carry out lifting operations MUST be a qualified crane operator. Never carry out lifting operations if any person is on the machine being lifted. Always use a wire rope that has ample strength for the weight of the machine being lifted. Keep the machine horizontal when lifting it. Never enter the area under or around a raised machine. There is danger that the machine may lose its balance. Before lifting the machine, do the following steps to prevent the machine from moving unexpectedly. Set the parking brake switch to the ON position. Set the work equipment lock lever to the LOCK position.
When lifting the machine, the wire rope must be fitted correctly or the machine may fall and cause serious injury or even death. Set the frame lock bar to the LOCK position. Remark The lifting procedure applies to machines with standard specifications. The method of lifting may differ depending on the attachments and options installed. For details about lifting a machine that does not conform to standard specifications, contact your Komatsu distributor. Remark For details about the weight of the machine, see “SPECIFICATIONS” on page 4-2. Lifting Position 2-162 WA430-6