Komatsu — Check Transmission Oil, Add Oil

Check Transmission Oil, Add Oil MAINTENANCE The parts and oil are very hot immediately after the engine is stopped and may cause burns, if touched. Wait for the temperature to drop before starting the work. Do this procedure if there is any sign of oil on the transmission case or if there is oil mixed with the cooling water. 1. Start the engine and run it for at least five minutes. 2. Open the cap of oil filler port (F). 3. Take out the dipstick (G) and use a cloth to wipe off the oil. 4. Fully insert dipstick (G) into filler pipe (F) and then remove it. The oil level should be between the H and L marks on dipstick (G). If the oil level is below the L mark, add oil through oil filler (F).

If the oil is above the H mark, drain the excess engine oil from drain plug (P) and check the oil level again. If the oil level is correct, insert dipstick (G) in the dipstick guide and then tighten the cap. WA430-6 3-37