MAINTENANCE Check Axle Oil Level, Add Oil Apply the parking brake and lock the front and rear frames with the frame lock bar. After stopping the engine, the parts and oil are very hot. Wait for the temperature to go down before starting this operation. Do this procedure if there is any sign of oil on the axle case. Inspect the machine when it is parked on a horizontal road surface. If the road surface is at an angle, the oil level cannot be checked correctly. 1. Set the parking brake switch to the ON position (A). 2. Lower the work equipment to the ground; stop the engine; and wait for the temperature of all parts to go down. 3.
Set the frame lock bar to the LOCK position (L) to lock the front and rear frames. 4. Remove the mud and dirt from around oil level plug (1), then remove the plug. A: Front axle B: Rear axle 5. Use a cloth to wipe off any oil stuck to the oil level gauge attached to plug (1). 3-38 WA430-6