Komatsu — Check Axle Oil Level, Add Oil

6. Set the oil level gauge (G) as shown in the graphic. MAINTENANCE (2): Axle (3): Spot facing face 7. The oil level should be between the two lines (H) and (L) on the oil level gauge. If the oil is below the (L) line, add axle oil through oil filler port (F). If the oil level is above the (H) line, drain the excess oil through drain plug (P), then check the oil level again. If the oil level is correct, install oil level plug (1) Tightening torque:. . . . . . . . . . . . . . 127 – 177 N•m (94 – 131 lbf ft) Remark For axles with the limited-slip differential, the brand of lubricating oil is different.

Use the specified lubricating oil as listed in “RECOMMENDED FUEL, COOLANT, AND LUBRICANTS” on page 3-12. WA430-6 3-39