Komatsu — Clean Element in Air Conditioner Recirculation Filter

MAINTENANCE Check for Loose Wheel Hub Nuts, Tighten If wheel hub bolts (1) are loose, tire wear will increase and accidents might happen. 1. Check for loose nuts and tighten, if necessary. When checking for loose nuts, always turn the nuts in the tightening direction. Tightening torque:. . . . . . . 825 – 1030 N•m (608.49 – 759.69 lbf ft) 2. If any stud bolt is broken, replace all the stud bolts for that wheel. Clean Element in Air Conditioner Recirculation Filter 1. Loosen knob (1), then remove filter inspection cover (2). 2. Remove filter (3) in the direction shown by the arrow. 3. Use compressed air to clean the recirculated air filter.

Direct dry compressed air (less than 0.69 MPa (100.08 psi)) to the element from inside along its folds, then direct it from outside along its folds and again from inside. 4. Replace the filter with a new part if the clogging cannot be removed with compressed air, or if it has been used for one year. Remark If the filter is clogged, the air flow will be reduced; there will be an abnormal noise from the air conditioner unit. 3-64 WA430-6