MAINTENANCE Lubricating 1. Using a grease pump, pump grease in through the grease fittings marked by the arrows in the graphic. 2. After greasing, wipe off any old grease that was pushed out. During the initial breaking of a new machine, carry out lubrication every ten hours for the first 50 hours of operation. When working on job sites where heavy-duty operations are frequent or when working continuously for more than eight hours, shorten the lubrication interval and carry out lubrication more frequently. 1. Bucket pin (2 places) 5. Lift arm pivot pin (2 places) 2. Bucket link pin (2 places) 6. Bellcrank pin (1 place) 3. Dump cylinder pin (2 places) 7. Steering cylinder pin (4 places) 4.
Lift cylinder pin (4 places) When carrying out greasing of bucket pin (1), lift arm pivot pin (5), and bellcrank pin (6), lower the bucket to the ground and set it horizontally. 3-66 WA430-6