20. Operate the steering, bucket, and lift arm cylinders to the end of their stroke three to four times. Stop the engine and loosen air bleed plug (13) to bleed the air from the hydraulic tank. After bleeding the air, tighten plug (13) again. MAINTENANCE Keep the engine running at low idle when bleeding the air. 21. Check that the hydraulic oil is at the standard level. For details, see “Check Oil Level in Hydraulic Tank, Add Oil” on page 3-59. 22. Increase the engine speed and repeat the procedure in Step 20 to bleed the air. Continue this operation until no more air comes out from plug (13). 23. After the bleeding air process has been completed, tighten plug (13). Tightening torque:. . . .
. . . . . . . . . . . . . . 11 ±2 N•m (100 ±13 lbf in) 24. Check that the hydraulic oil is at the standard level. For details, see “Check Oil Level in Hydraulic Tank, Add Oil” on page 3-59. 25. Check that there is no leakage of oil from the filter cover mount. WA430-6 3-81