MAINTENANCE Replace Hydraulic Tank Breather Element The parts and oil are very hot immediately after the engine is stopped, and may cause burns. Wait for the temperature to go down before starting the work. When removing the oil filler cap, turn it slowly to release the internal pressure and then remove it. Before removing the breather, wipe all dust from around the breather. 1. Lower the work equipment to the ground and turn the parking brake switch to the ON position (A). 2. Stop the engine and wait for the temperature of all parts to go down. 3. Remove the cap of oil filler (F). 4. Remove breather (1) built into the cap. 5.
Replace the filter element (2) with a new part, and then install breather (1) to the cap. 6. Tighten the cap of oil filler (F). 3-82 WA430-6