PACCAR 520 — Where are the fuses located?

EMERGENCY - Roadside Assistance have a large red + or P on the battery case, post, or clamp. 13. Start the vehicle that has the good battery first. Let it run for 5 minutes. 14. Start the vehicle that has the discharged (dead) battery. Cab fuses are located in the center panel. 2 NOTE Always connect positive (+) to posi- tive (+) and negative (-) to negative (-). The engine should start. If the engine fails to start, do not continue to crank the starter. Instead, contact the nearest authorized dealer. 9. Attach the other end of the same cable to the positive (+) terminal of the good (booster) battery. 10.

Attach the remaining jumper cable FIRST to the negative (-) terminal (black or N) of the good battery. WARNING! When disconnecting jumper cables, make sure they do not get caught in any moving parts in the engine compartment. Failure to comply may result in death, personal injury, equipment or property damage. Main power relays are located on the power distribution center in the engine compartment. NOTE A small amount of oil in the system may be normal and should not, in it- self, be considered a reason to re- place the desiccant cartridge. Oil stained desiccant can function ade- quately. Reverse the above procedure exactly when removing the jumper cables.

With engine running, disconnect jumper cables from both vehicles in the exact reverse order, making sure to first remove the negative cable from the vehicle with the discharged battery. 11. Attach the other end of the negative cable (dead battery truck) to a bare metal part not bolted to the engine block. 12. If either vehicle is equipped with battery disconnects, ensure that they are in the ON position. Where are the fuses located? When determining if a fuse is blown, it is important to know where to find the related fuses. 36 Y53-6096-1A1 (01/17)