How to Procedures Table 9. 96 All information subject to change without notice. Copyright © 2014 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0175 Coolant Interval Action Ethylene Glycol* / Water + Conventional Corrosion Inhibitor 20,000 miles (32,000 km) or 3 months Test nitrite concentration with test strip. Add SCA or dilute coolant as needed. 300,000 miles (480,000 km) Drain and clean system. Refill with new coolant. Ethylene Glycol* / Water + OAT Inhibitor 300,000 miles (48,000 km) or 10,000 hours Add POWERCOOL Plus extender. 600,000 miles (960,000 km), 4–years, or Engine Overhaul Drain and clean system. Refill with new coolant.
Ethylene Glycol* / Water + NOAT Inhibitor 300,000 miles (48,000 km) or 10,000 hours Add NOAT extender. 600,000 miles (960,000 km), 4–years, or Engine Overhaul Drain and clean system. Refill with new coolant. Water Only + Conventional Corrosion Inhibitor 20,000 miles (32,000 km), 3–months, or 500 hours Test nitrite concentration with test strip. Add SCA or dilute coolant as needed. Engine Overhaul Drain and clean system. Refill with new coolant. Water Only + OAT Inhibitor 300,000 miles (480,000 km), 2–years, or 10,000 hours Add POWERCOOL Plus extender. 600,000 miles (960,000 km), 4–years, or Engine Overhaul Drain and clean system. Refill with new coolant.
Water Only + NOAT Inhibitor 300,000 miles (480,000 km), 2–years, or 10,000 hours Add NOAT extender. 600,000 miles (960,000 km), 4–years, or Engine Overhaul Drain and clean system. Refill with new coolant. *Propylene glycol is an acceptable substitute for ethylene glycol.