DD Platform EuroV Operators Manual Starting the Engine for the First Time WARNING: EXPLOSION To avoid injury from explosion, never use ether with an engine's electrical cold starting system. Before starting the engine the first time, perform an inspection of the engine systems. To start the engine, the transmission should be in neutral and the ignition key turned to ON. WARNING: ENGINE EXHAUST To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. WARNING: PERSONAL INJURY To avoid injury when working near or on an operating engine equipped with an hydraulic clutch fan, remove loose items of clothing and jewelry.
Tie back or contain long hair that could be caught in any moving part causing injury. The hydraulic fan may start without warning. You will notice that the Amber Warning Lamp (AWL), Red Stop Lamp (RSL), Malfunction Indicator Lamp (MIL), and High Exhaust Temperature (HEST) lamp will come on. This is the result of the DDEC computer diagnosing the system to ensure everything is functional, including the light bulbs for the warning lights. If everything is OK, all lights will go out in approximately five seconds. The lights must go out before starting the engine. If starting a vehicle, the operators foot must be OFF the accelerator pedal before starting the engine. NOTICE:
If the warning lights stay on, or do not come on momentarily after turning on the ignition, contact your nearest Detroit™ Dealer or Distributor. Operating the engine under these circumstances may result in engine damage. Starting the Engine 1. Place the transmission in neutral, and set the parking brake. NOTICE: To prevent serious starter motor damage, release the ignition switch immediately after the engine has started. 2. Turn on the ignition switch. All information subject to change without notice. 27 DDC-SVC-MAN-0209 Copyright © 2019 DETROIT DIESEL CORPORATION