DD Platform EuroV Operators Manual Removal of the Fuel Prefilter - Two-Filter System Remove the prefilter as follows: 1. Using a 36 mm socket, unscrew the prefilter cap. 2. Pull the cap and prefilter straight up and out of the fuel filter housing. 3. Remove the prefilter (1) from the prefilter cap (2) by placing the filter on a solid surface and apply pressure on prefilter cap (2) at an angle. 4. Discard the prefilter cap seal ring. Installation of the Fuel Prefilter - Two-Filter System Install the fuel prefilter as follows: NOTE: If a filter service is being performed, replace all other filters before priming. 1. Install a new prefilter cap seal ring on to the prefilter cap. 2.
Snap new prefilter into the prefilter cap. 3. Apply a thin coat of petroleum-based lithium grease to the prefilter cap seal ring and the prefilter seals (1). All information subject to change without notice. 99 DDC-SVC-MAN-0209 Copyright © 2019 DETROIT DIESEL CORPORATION