Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

CAUTION: Always use new piston pin clips. Do not allow the clip gap to align with the piston pin slot. 5. Check: Piston ring position CAUTION: Make sure that the ring ends are properly fitted around the ring locating pins in the piston grooves. Be sure to check that the manufacturer’s marks or numbers stamped on the rings face upward. 6. Install: Gasket (cylinder) 7. Install: Cylinder NOTE: Install the cylinder with one hand while com- pressing the piston rings with the other hand. 8. Tighten: Nuts (cylinder) 5-12 CYLINDER HEAD AND CYLINDER ENG Nuts (cylinder): 25 Nm (2.5 mkg, 18 ftlb) NOTE: Tighten nuts in crisscross pattern.