9. Install: Gasket (cylinder head) Cylinder heads 10. Tighten: Nuts (cylinder head) Tightening steps: Temporarily tighten the cylinder head nuts 1 6 as follows. 1st step: Tighten the nuts 1 6 2nd step: Retighten the nuts 1 6 5-13 CYLINDER HEAD AND CYLINDER ENG Nut (cylinder head) 1 6 : 13 Nm (1.3 mkg, 9.4 ftlb) Nut (cylinder head) 1 6 : 25 Nm (2.5 mkg, 18.1 ftlb)